Nano Induct Air Sanifier® Purifier
(Please contact us for pricing)


Click images to see more.

 


The Air Oasis Induct ACT air purifier is ideal for consistent coverage on areasup to 5000 square feet or areas as small as 1000 square feet.

This UV air purifier installs in your HVAC system easily to ensure the duct work in your home/office stays free of harmful contaminants such as mold. It also allows your home/office to be covered more evenly due to ions being forced throughout the duct work and into each room with an air outlet. 

 

Specifications & Features

Click here to expand +

Dimensions:
NanoHCT-6: 5” x 5” x 8”  
NanoHCT-9: 5” x 5” x 11”  
NanoHCT-14: 5” x 5” x 16”
Weight:
Less than 0.7 lbs.

Electrical:
100-240 VAC input / 26 VDC output power adapter. Can be hardwired 24 VAC.
NanoHCT-6: 11 Watts  
NanoHCT-9: 13 Watts
NanoHCT-14: 18 Watts
Coverage:
NanoHCT-6: 1000 sq. ft.  
NanoHCT-9: 3000 sq. ft.  
NanoHCT-14: 5000 sq. ft.
Ozone:
Less than .05 ppm (.05 ppm or lower is FDA and UL safety standard)

Replacements:
2 year AHPCO Cell  Part#:AHPCO-HCT6, AHPCO-HCT9, AHPCO-HCT14
Warranty:2 year limited warranty

Features and benefits

The nanoHCT Induct was designed for continuous operation 24/7.

26VDC wall adapter (included in price)

The nanoHCT Induct is powered by a 26 VDC power adapter with a rated input voltage of 100 - 240 VAC and 6 foot supply cord. The adapter connects to a 110 or 230 VAC 3 amp power cord that is 5 feet in length. The AC power cord is detachable and interchangeable to meet global requirements. For safety and to ensure proper function of the nanoHCT Induct we recommend that ONLY the power adapter included with the original purchase be used.

Optional 24 VAC Internal HVAC Power Source Wiring

Most forced-air heating or cooling systemsare equipped with an internal 24 VAC power source, to which the nanoHCT Induct can be safely connected without overloading other circuits.

Indicator Lights

The unit has two indicator lights that tell specific information about the NANO Induct.

Green: Unit has power, ballast and UVC lamp are operating efficiently.

Red: Unit has power, UVC lamp is defective or not properly connected. Contact an Air Oasis representative.

Blue Solid: The UVC lamp is within its two year life span. No action is needed.

Blue Flashing: The UVC lamp is outside its two year life span and should be replaced.

No Lights: There are two possibilities.
The unit is not properly connected to the power supply.

The ballast exceeded the operating temperature of 105˚C. The thermal protector opened the circuit, disconnecting power to the ballast. The circuit automatically resets when the ballast cools.

Coverage

As a general recommendation:

- the nanoHCT Induct 6 should be used in areas up to 1000 square feet

- the nanoHCT Induct 9 should be used in areas up to 3000 square feet and

- the nanoHCT Induct 14 should be used for areas between 3000 and 5000 square feet.

Areas of higher contamination, areas above 5000 square feet or with ceilings above 10 feet may require additional units for best results.

Noise
- zero operational noise
Low Maintenance

The NANO Induct was engineered to be virtually maintenance free.

AHPCO Cell Replacement

The AHPCO Cell should be replaced every two years.

Outer Housing Maintenance

Never use harsh cleaners, chemicals or abrasives on the plastic polycarbonate housing or anodized aluminum. Only a dry micro fiber towel or a towel lightly moistened with water should be used to remove any dust or other debris from the outside of the unit.

 

 

Indoor Air Quality Test kits
(Prom: S$20 U.P S$45)

Test your air quality before and after use of any of our air purifiers.

 

 

Each test kit contains:

Two petri dishes; two bottles of Easygel color brochure on air quality detailed instructions. This test kit will give you a good idea of general air quality in your home or allow you to conduct a before and after test.

After exposing the test kit to air for 1 hour, you place it in a room temperature and low light space for 3 days or more. A dresser works good. After 3 days view the test to see how much bacteria, mold, yeast, fungus etc. has grown.